| Billet Shearing Machine |
|
| |
|
"Auditra Engineering" Billet Cutting machines are fabricated from tested rolled plates from Main Producers , which are mild in composition, but sturdy in performance All the drive gears are manufactured out of forged En-9/19/24 Steel which id duly hardened and grounded. The shaft/Crank is forged En-8/9 steel. All the Bearing are of best quality, etc. Gun Metal Bushes are made with Copper Alloys to last longer life. All the machines are tested here for capacity and performance before despatch.
|
| |
| Salient Features |
| All the above capacities are for M.S Billet/Slabs. For Special Steel like S.S / Spring Steel/ Alloy Steel special machines are manufactured or request. |
|
|
|
|
| Swival Type Rotary Shear |
|
| |
|
Technical Specifications
|
• |
Cutting Capacity 8 to 25 mm Hot Bras at 800 C |
• |
Ranging Form 300 to 500 mm P.C.D |
Salient Features |
• |
Fixed and Swiveling type Rotary |
• |
Fully Automatic with pneumatic controls, capable of cutting hot ends (front and rear) During Rolling, and fixed Lengths of finished bars |
• |
Steel Fabricated body |
• |
Circular Blades manufactured from High carbon, high chrome steel |
|
|
|
|
|
| Straightening Machine |
|
| |
|
| Technical Specifications |
• |
Available upto 8” Billet Cutting & 14” x 14” Slab Cutting Capacity |
Salient Features |
• |
Steel Fabricated Rigid Body |
• |
Heavy Duty Spherical Roller Bearings |
• |
Ph. Bronze Bushing on Crank Shaft |
• |
6/8 Gears |
• |
Clutch / Non Clutch Type |
• |
Stroke Per Minute 6-10 |
| |
|
|
| Section Straightening Machine |
|
| |
|
| Technical Specifications |
• |
Available in 130 mm Roll Centers to 450 mm Roll Centers |
| |
No of Rolls – 10/8 |
| |
Suitable for all type of sections |
Salient Features |
• |
High Quality Chill / S.G Iron / Adamite Rolls |
• |
Steel Fabricated Body |
• |
Heavy Duty Worm gear type Screen down mechanism |
• |
Mechanical / Hydraulic System |
• |
Suitable for joists upto 500 mm Channels upto 400 mm Angles 200 x 200 mm |
|
|
|
|
| Gear Coupling (Flexible) |
|
| |
|
| Salient Features |
• |
Used for taking possible misalignment of shafts |
• |
Saves power and bearing breakdown |
• |
Made from En - 9 and Forged Steel |
• |
Available in size range no. 106-112, that are suitable for 8"to 24" SRM |
Technical Specifications |
• |
Made from Enforged Steel |
• |
Size range no. 106 to 112, suitable for 6" to 24" P.C.D. rolling mills |
|
|
|
|
Speed Increaser / Reducer |
|
| |
|
Engineering of technically advanced speed increasers / reducers is one of our expertise. They are suitable to control the functional speed of various shearing machines. Attributed with modern features as per industry standards and requirements, our speed controlling machinery is extensively used across the industry. Robust in design, easy to maintain & user friendly operations, are some features that make our brand a preferred one. We design these machines with overload / power fluctuation management features and also ensure safety aspects.
|
|
|
|
|
| |
|
| Mill Stands |
|
| |
|
Auditra Engineering manufactures various types and sizes of mill stands. Keyword of our equipment is reliability, ruggedness and ease of operation and maintenance. The salient features of our mill stands are that they are compact and simple design, they ensure quick roll changing and they require minimum maintenance. Auditra Engineering offers various types of mill stands such as C.I.Casted stands, steel fabricated stands, steel casted stands, gun metal type stands, bearing type stands etc. |
|
|
| Salient Features |
Technical Specifications |
• |
Compact and Simple Design |
• |
Ensures Quick Roll Changing |
• |
Independent Operation of Screw
Up/Down Mechanism on Drive and Non Drive Ends |
• |
Minimum Maintenance and Down Time |
|
• |
3-Hi Stands and 2-hi Stands |
• |
Center Roll Fixed Fiber Type Stands |
• |
Bearing Type Stands |
• |
Gun Metal Type Stands |
• |
Mill Stands Ranging from 6'' PCD to 24'' PCD |
• |
C.I. Casted Stands |
• |
Steel Fabricated Stands |
• |
Steel Casted Stands |
|
|
| |
|
| Reduction Gear Box |
|
| |
|
• |
Torisionally rigid steel fabricated body designed to dampen vibrations |
• |
Designed to work efficiently at peak loads |
• |
Case hardened and grinded double helical gears |
• |
Amply rated bearings |
• |
Splash lubrication |
• |
Forced lubrication |
|
| |
| Technical Specifications |
• |
Single, Double and Multi Stage Reduction Gear Boxes as per requirement |
• |
Gear Boxes for 100HP to 2000HP |
• |
Gears in Module and DP System |
|
|
|
|
|
| |
|
| 3 Hi Pinion Gear Box |
|
| |
|
• |
3 Hi and 2 Hi Pinion Gear Boxes, Low Speed and High speed type |
• |
4 Hi Gear Boxes for Cold Rolling Mills |
• |
Speed Increaser cum Pinion gear Boxes |
• |
Gear Boxes suitable for 200 HP to 2000 HP Drives |
• |
Gear Boxes suitable for 150 mm PCD to 600 mm PCD Mills |
• |
Speed Range 50 R.P.M to 750 R.P.M |
|
| |
| Salient Features |
| Torsionally Rigid Steel Fabricated Body designed to Dampen vibrations |
• |
Double helical Gears made of En-9, En-19, or En-24 Quality steel Forgings |
Duly hardened and grounded |
• |
Amply Rated Bearings to work efficiently at Peak Loads |
• |
Duble Oil Seals fitted on Shaft extensions |
• |
Lubrication lines for Bearings, and Oil Splash system for gears are provided |
|
|
 |
|
|
| |
|
| Fly Wheel Assembly |
|
| |
|
• |
Dynamically Balanced Fly Wheels |
• |
Ultra Sound Testing for Crack Detection |
• |
Forged Fly Wheel Shafts En-8 Class IV |
• |
Heavy Duty Plumber Blocks |
• |
Spherical Roller Bearings |
• |
Speed 60 R.P.M. to 700 R.P.M |
• |
Suitable for 100 H.P. to 2000 H.P Technical |
• |
Fly Wheels up to 15 Mt. Tons |
• |
C.I. Casted/Steel Caster Fly Wheels |
• |
Steel Fabricated Fly Wheels |
|
|
|
|
|
| |
|
Universal Joint Shaft Cardan Shaft
| |
|
Universal Joint shaft transmits torque from the driven unit and are proved components of the technical engineering.They enable the connection between two shafts,Which are arranged not in line and allow angular deflection in any plane.Length Variations between the Shaft end are compensated by splined sliding components.the application of universal shafts will result in following cost reductions for the user:
Simplified assembly: No alignment of the units to be connected Economical Maintenance:High Class bearings gurantee long service life.production down time is reduced by simplified arrangements of total installation |
| |
|
|
|
|
